Radio Controls Steps
Programmed
Text Message
button
Press the programmed Text
Message button.
Menu
1
to access the menu.
2
or to Messages
and press to select.
2
or to Sent Items and press to select.
When you select Sent Items and it contains no
text messages, the display shows List Empty,
and sounds a low tone if Keypad Tones are turned
on (see Turning Keypad Tones On or Off on page
132).
3
or to Delete All and press to select.
4 Choose one of the following.
•
or to Yes and press to select. The
display shows positive mini notice.
•
or to No and press to return to the
previous screen.
Receiving a Text Message
When your radio receives a message, the display
shows the alias or ID of the sender and the Message
icon at the far left of the screen.
You can select Read when receiving a text message.
Note: The radio exits the Text Message alert screen
and sets up a Private or Group Call to the sender of
the messageif the PTT button is pressed when the
radio is displaying the alert screen.
Reading a Text Message
1
or to Read? and press to select.
Selected message in the Inbox opens.
A subject line may be shown if the message is
from an e-mail application.
2 Do one of the following:
•
Press to return to the Inbox.
Advanced Features in Non-Connect Plus Mode
105
English
To Next Page
Loading...