If the message is not sent, the display shows
negative mini notice.
Responding to the Job Ticket
1
to access the menu.
2
or to Job Tickets and press to
select.
3
or to the required folder and press to
select.
You can also press the corresponding number key
(1–9) to access the required folder.
4
or to the required Job Ticket and press
to select.
5
Press
once more to access the sub-menu.
You can also press the corresponding number key
(1–9) to Quick Reply.
6
or to the required Job Ticket and press
to select.
You can also press the corresponding number key
(1–9) to respond to the job ticket.
The display shows transitional mini notice, confirming
your message being sent.
If the message is sent, a tone sounds and the display
shows positive mini notice.
If the message is not sent, a low tone sounds and the
display shows negative mini notice.
Deleting a Job Ticket
Delete a Job Ticket.
Radio
Control
Steps
Programmed
Job Ticket
button
1 Press the programmed Job
Ticket button.
2
or to All and press
to select.
Advanced Features in Non-Connect Plus Mode
112
English
To Next Page
Loading...