6
or to Connect and press to select.
Display shows Connecting to <Device>. Your
Bluetooth-enabled device may require additional
steps to complete the pairing. Refer to respective
Bluetooth-enabled device’s user manual.
If successful, the radio display shows <Device>
Connected. A tone sounds and
appears besides
the connected device. The Bluetooth Connected icon
appears on the status bar.
If unsuccessful, the radio display shows Connecting
Failed.
Note: If pin code is required, use the same entry
method as Step 2 in Accessing the Radio from
Password on page 121.
Finding and Connecting from a Bluetooth Device
(Discoverable Mode)
Do not turn off your Bluetooth or your radio during the
finding and connecting operation as this may cancel
the operation.
1 Turn Bluetooth On.
See Turning Bluetooth On and Off on page 125.
2
to access the menu.
3
or to Bluetooth and press to select.
4
or to Find Me and press to select.
Your radio can now be found by other Bluetooth-
enabled devices for a programmed duration. This
is called Discoverable Mode.
5 Turn on your Bluetooth-enabled device and pair it
with your radio.
Refer to respective Bluetooth-enabled device’s
user manual.
Connecting to a Paired Bluetooth Device
Do not turn off your Bluetooth-enabled device or
press during the connecting operation as this
cancels the operation.
The radio connects automatically to the paired
Bluetooth-enabled device. If unsuccessful, follow the
procedure described next.
Advanced Features in Non-Connect Plus Mode
126
English
To Next Page
Loading...