Once the programming is complete, depending on
your radio’s configuration:
•
A tone sounds, the display shows Updating
Restarting, and your radio restarts (powers off
and on again).
•
Select between Restart Now or Postpone.
Selecting Postpone allows your radio to return to
the previous display, with an OTAP Timer icon
visible, for a period of time before the automatic
restart occurs.
Upon power up after the automatic restart occurs, the
display shows Sw Update Completed if the OTAP
update is successful or Sw Update Failed if the
OTAP update is unsuccessful.
See Software Update on page 158 for your updated
software version.
Utilities
Locking and Unlocking the Keypad
You can lock your radio’s keypad to avoid inadvertent
key entry.
To lock/unlock your radio’s keypad.
Option Steps
Locking the
Keypad
1
to access the menu.
2
or to Utilities and
press to select.
3
or to Radio Settings
and press to select.
4
or to Keypad Lock and
press to select.
You can also use or to
change the selected option.
Unlocking
the Keypad
Press followed by .
After the keypad is locked, the display shows
Keypad Locked and returns to the Home screen.
After the keypad is unlocked, the display shows
Keypad Unlocked and returns to the Home
screen.
Advanced Features in Non-Connect Plus Mode
131
English
To Next Page
Loading...