Turning the Voice Operating Transmission (VOX)
Feature On or Off
This feature allows you to initiate a hands-free voice
activated call on a programmed channel. The radio
automatically transmits, for a programmed period,
whenever the microphone on the VOX-capable
accessory detects voice.
Pressing the PTT button during radio operation will
disable VOX. To re-enable VOX, do one of the
following:
• Turn the radio off and power it on again.
• Press the programmed VOX button to toggle the
feature on or off.
• Follow the steps described next to access this
feature via the radio menu.
Note: Turning this feature on or off is limited to radios
with this function enabled. Check with your dealer or
system administrator for more information.
1
to access the menu.
2
or to Utilities and press to select.
3
or to Radio Settings and press to
select.
4
or to VOX and press to select.
5
Press to disable/enable VOX.
The display shows beside Enabled.
The disappears from beside Enabled.
Setting the Display Backlight Timer
You can set the the radio’s display backlight timer as
needed. The setting also affects the Menu Navigation
Buttons and keypad backlighting accordingly.
Press the programmed Backlight button to toggle the
backlight settings, or follow the procedure described
next to access this feature via the radio menu.
The display backlight and keypad backlighting are
automatically turned off if the LED indicator is
disabled (see Turning the LED Indicator On or Off on
page 140).
1
to access the menu.
Advanced Features in Non-Connect Plus Mode
133
English
To Next Page
Loading...