2
or to Utilities and press to select.
3
or to Radio Settings and press to
select.
4
or to LED Indicator and press to
select.
You can also use or to change the selected
option.
5
Press
to enable/disable the LED Indicator.
The display shows beside Enabled.
The disappears from beside Enabled.
Turning the Voice Announcement On or Off
Note: The Voice Announcement feature can only be
enabled in MOTOTRBO CPS. If enabled, the Text-to-
Speech feature is automatically disabled, and vice
versa.
This feature enables the radio to audibly indicate the
current Zone or Channel the user has assigned, or
programmable button press. This audio indicator can
be customized per customer requirements. This is
typically useful when the user is in a difficult condition
to read the content shown on the display.
Toggle Voice Announcement On or Off.
Radio Control Steps
Programmed
Voice
Announcement
Button
Press the programmed Voice
Announcement button.
Menu
1
to access the menu.
2
or to Utilities
and press to select.
3
or to Radio
Settings and press to
select.
4
or to Voice
Announcement and press
to select.
Advanced Features in Non-Connect Plus Mode
141
English
To Next Page
Loading...