Blinking red Radio is transmitting at low battery
condition, receiving an emergency
transmission or has failed the self-
test upon powering up.
Rapidly
blinking red
Radio is receiving over-the-air file
transfer (Option Board firmware file,
Network Frequency file or Option
Board Codeplug file) or upgrading to
a new Option Board firmware file.
Blinking
green and
yellow
Radio is receiving a Call Alert,
received a text message or Scan is
enabled and is receiving activity.
Solid yellow Radio is in Bluetooth Discoverable
Mode. Also indicates fair battery
charge when programmable button
is pressed.
Double
blinking
yellow
Radio is actively searching for a new
site.
Blinking
yellow
Radio is receiving a Call Alert or
Scan is enabled and is idle (radio will
remain muted to any activity).
Solid green Radio is powering up or transmitting.
Also indicates full charge of the
battery when the programmable
button is pressed.
Blinking
green
Radio is powering up, receiving a
non-privacy- enabled call or data.
Rapidly
blinking
green
Radio is receiving a privacy-enabled
call.
Indicator Tones
High pitched tone Low pitched tone
Positive Indicator Tone
Negative Indicator Tone
Audio Tones
Audio tones provide you with audible indications of
the status, or response to data received on the radio.
Additional Radio Controls in Connect Plus Mode
167
English
To Next Page
Loading...