Initiating Remote Monitor
Note: Remote Monitor automatically stops after a
programmed duration or when there is any attempt to
initiate transmission, change channels or power down
the radio.
1 Access the Remote Monitor feature.
Radio
Control
Steps
Programmed
Remote
Monitor
Button
1 Press the programmed
Remote Monitor button.
2
or to the required
subscriber alias or ID and
press to select.
Menu
1
to access the menu.
2
or to Contacts and
press to select.
3
or to the required
subscriber alias or ID and
press to select.
Radio
Control
Steps
4
or to Manual Dial
and press to select.
5
or to Remote Mon.
and press to select.
The first text line shows Rem. Monitor. The
second text line displays the Target Alias,
indicating the request is in progress. The LED
lights up blinking green.
2 Wait for acknowledgement.
If successful, a positive indicator tone sounds and
the display momentarily shows Rem. Monitor
Successful. Your radio starts playing audio from
the monitored radio for a programmed duration
and display shows Rem. Monitor, followed by
target alias. Once the timer expires, the radio
sounds an alert tone and the LED turns off.
Advanced Features in Connect Plus Mode
186
English
To Next Page
Loading...