•
or to the required subscriber alias
and press to select.
•
use the Manual Dial menu
•
or to Manual Dial and press to
select.
• The Manual Dial text entry screen shall be
displayed. Enter the Subscriber ID and
press
.
4
or to Call Alert and press to select.
The display shows Call Alert: <Subscriber
Alias or ID>Call Alert and the subscriber
alias or ID, indicating that the Call Alert has been
sent.
The LED lights up solid green when your radio is
sending the Call Alert.
If the Call Alert acknowledgement is received, the
display shows Call Alert Successful.
If the Call Alert acknowledgement is not received,
the display shows Call Alert Failed.
Making a Call Alert with the One Touch Access Button
Press the programmed One Touch Access
button to make a Call Alert to the predefined alias.
The display shows Call Alert and the
subscriber alias or ID, indicating that the Call Alert
has been sent.
The LED lights up solid green when your radio is
sending the Call Alert.
If the Call Alert acknowledgement is received, the
display shows Call Alert Successful.
If the Call Alert acknowledgement is not received,
the display shows Call Alert Failed.
Emergency Operation
Note: If your radio is programmed for “Silent” or
“Silent with voice” emergency initiation, in most cases
it automatically exits silent operation after the
Emergency Call or Emergency Alert is finished. The
exception to this rule is when “Emergency Alert” is the
configured Emergency Mode and “Silent” is the
configured Emergency Type. If your radio is
programmed in this manner, the silent operation
continues until you cancel silent operation by
Advanced Features in Connect Plus Mode
200
English
To Next Page
Loading...