1 While the Emergency Details (or Alarm List)
screen is displayed, press .
The Exit Alarm List screen displays.
2 Perform one of the following actions:
•
Select Yes and press
to save the
emergency details to the Alarm List, and to exit
the Emergency Details (or Alarm List) screen.
•
Select No and press to return to the
Emergency Details (or Alarm List) screen.
Deleting the Emergency Details
1 While the Emergency Details screen is displayed,
press .
The Delete screen displays.
2 Perform one of the following actions:
•
Select Yes and press
to delete the
emergency details.
•
Select No and press to return to the
Emergency Details screen.
Responding to an Emergency Call
Note: If you do not respond to the Emergency Call
within the time allotted for the Emergency Call Hang
Time, the Emergency call will end. If you want to
speak to the group after the Emergency Call Hang
Time expires, you must first select the channel
position assigned to the group (if not already
selected). Then, press PTT to start a non-Emergency
Call to the group.
1 When receiving an Emergency Call, press any
button to stop all Emergency Call received
indications.
2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0
cm) from your mouth.
3 Press the PTT button to initiate a voice
transmission on the Emergency group.
All radios that are monitoring this group hear your
transmission.
4 Wait for the Talk Permit Tone to finish (if enabled)
and speak clearly into the microphone.
The LED lights up green.
5 Release the PTT button to listen.
Advanced Features in Connect Plus Mode
203
English
To Next Page
Loading...