1 Access the Text Message feature.
Radio
Controls
Steps
Programm
ed Text
Message
button
Press the programmed Text
Message button.
Menu
1
to access the menu.
2
or to Messages and
press to select.
2
or to Quick Text and press to select.
3
or to the required Quick Text and press
to select.
A blinking cursor appears.
4 Use the keypad to edit the message, if required.
Press to move one space to the left. Press or
the key to move one space to the right.
Press the
key to delete any unwanted
characters. Long press to change the text
entry method.
5
Press once message is composed.
6 Depending on whether you want to send, save, re-
edit, or delete the newly composed message, do
one of the following.
•
or to Send, and press to send the
message.
•
or to Save, and press to save the
message to the Drafts folder.
•
to edit the message.
•
again to choose between deleting the
message or saving it to the Drafts folder.
7 If you are sending the message, select the
recipient by
•
or to the required alias and press
to select.
Advanced Features in Connect Plus Mode
208
English
To Next Page
Loading...