Replying to a Text Message from the Inbox
1 Access the Text Message feature.
Radio
Controls
Steps
Programm
ed Text
Message
button
Press the programmed Text
Message button.
Menu
1
to access the menu.
2
or to Messages and
press to select.
2
or to Inbox and press to select.
3
or to the required message and press
to select.
4
Press once more to access the sub-menu.
5 Do one of the following:
•
or to Reply and press to select.
•
or to Quick Reply and press to
select.
A blinking cursor appears.
6 Use your keypad to write/edit your message.
7
Press once message is composed.
The display shows Sending Message, confirming
your message is being sent.
If the message is sent successfully, a tone sounds
and the display shows Message Sent.
If the message cannot be sent, a low tone sounds
and the display shows Message Send Failed.
If the message cannot be sent, the radio returns
you to the Resend option screen (see Managing
Fail-to-Send Text Messages on page 211).
Deleting a Text Message from the Inbox
1 Access the Text Message feature by performing
one of the following actions:
Advanced Features in Connect Plus Mode
218
English
To Next Page
Loading...