Radio
Controls
Steps
• select the required alias or ID
directly
•
or to the required
alias or ID and press to
select.
•
use the Manual Dial menu
•
or to Manual Dial
and press to select.
•
or to Radio
Number and press to
select.
• The first line of the display
shows Radio Number: .
the second line of the
display shows a blinking
cursor. Use the keypad to
enter the subscriber alias
or ID and press .
Radio
Controls
Steps
4
or to Radio Enable and
press to select.
The display shows Radio Enable: <Subscriber
Alias or ID> and the LED lights up solid green.
2 Wait for acknowledgement.
If successful, a positive indicator tone sounds and
the display shows Radio Enable Successful.
If not successful, a negative indicator tone sounds
and the display shows Radio Enable Failed.
Password Lock Features
If enabled, this feature only allows you access your
radio if the correct password is entered upon
powering up.
Accessing the Radio from Password
1 Power up the radio.
The radio sounds a continuous tone.
Advanced Features in Connect Plus Mode
224
English
To Next Page
Loading...