5
or to the required language and press
to enable. appears beside selected language.
Turning the LED Indicator On or Off
You can enable and disable the LED Indicator if
needed.
1
to access the menu.
2
or to Utilities and press to select.
3
or to Radio Settings and press to
select.
4
or to LED Indicator and press to
select.
You can also use or to change the selected
option.
5
Press to enable/disable the LED Indicator.
The display shows beside Enabled.
The disappears from beside Enabled.
Identifying Cable Type
You can select the type of cable your radio uses.
1
to access the menu.
2
or to Utilities and press to select.
3
or to Radio Settings and press to
select.
4
or to Cable Type and press to select.
You can also use
or to change the selected
option.
5 The current cable type is indicated by a .
Voice Announcement
This feature enables the radio to audibly indicate the
current Zone or Channel the user has just assigned,
or programmable button press. This audio indicator
can be customized per customer requirements. This
Advanced Features in Connect Plus Mode
238
English
To Next Page
Loading...