is used to track the radio activities before entering
screen saver mode.
Radio starts Screen Saver Pre Duration upon
power up. Radio enters into screen saver mode when
Screen Saver Pre Duration timer expires, the
radio exits screen saver mode and responds to
related transaction normally upon any user input and
over the air transaction.
Radio restarts Screen Saver Pre Duration upon
any user input and over the air transaction. After
being in Screen Saver mode for 5 seconds, radio
enters keypad lock state automatically. When any
audio or Bluetooth accessory is connected, battery
saver mode is enabled, radio enters screen saver
mode.
If there is any user input or over the air transaction,
the radio exits screen saver mode and responds to
user interaction. The Screen Saver Pre Duration
is restarted and the radio goes back to screen saver
mode when it expires.
Note: The screen saver mode is to help improve
battery life.
Audio Accessory
The audio accessory has two modes: Normal and
Battery Saver mode. When audio accessory is
plugged in and the setting is in Battery Saver Mode,
the radio restarts the timer and goes into screen
saver mode. In this scenario, when there is any user
input (including user input on radio and accessory
attachment/detachment) or when receiving
emergency alarm/call, the radio exits screen saver
mode and responds to user event as normal. The
Screen Saver timer restarts and the radio goes back
to screen saver mode when the time allocated
expires.
Auto Keypad Lock
You can enable/disable your radio’s auto keypad lock
to avoid inadvertent key entry.
1
to access the menu.
2
or to Utilities and press to select.
3
or to Radio Settings and press to
select.
Advanced Features in Connect Plus Mode
240
English
To Next Page
Loading...