• Firmware and Codeplug Versions
• Open-Source Software Information
Press at any time to return to the previous
screen or long press to return to the Home
screen. The radio exits the current screen once the
inactivity timer expires.
Accessing the Battery Information
Displays information on your radio battery.
1
to access the menu.
2
or to Utilities and press to select.
3
or to Radio Info and press to select.
4
or to Battery Info and press to
select.
The display shows the battery information.
For IMPRES batteries ONLY: The display reads
Recondition Battery if the battery requires
reconditioning in an IMPRES charger. After the
reconditioning process, the display then shows the
battery information.
Checking the Radio Model Number Index
This index number identifies your radio’s model-
specific hardware. Your radio system administrator
may ask for this number when preparing a new
Option Board codeplug for your radio.
1
to access the menu.
2
or to Utilities and press to select.
3
or to Radio Info and press to select.
4
or to Model Index and press to
select.
The display shows the Model Number Index.
Checking the CRC of the Option Board OTA
Codeplug File
Follow the instructions below if your radio system
administrator asks you to view the Option Board OTA
Codeplug File CRC (Cyclic Redundancy Check). This
Advanced Features in Connect Plus Mode
249
English
To Next Page
Loading...