menu option only appears if the Option Board
received its last codeplug update OTA.
1
to access the menu.
2
or to Utilities and press to select.
3
or to Radio Info and press to select.
4
or to OB OTA CPcrc and press to
select.
The display shows some letters and numbers.
Communicate this information to your radio
system administrator exactly as shown.
Displaying the Site ID (Site Number)
Note: If you are not currently registered at a site, the
display shows Not Registered.
The radio briefly shows the Site ID as it registers with
a Connect Plus site. Following registration, the radio
does not generally indicate the Site number. To
display the registered Site number, do the following:
1
to access the menu.
2
or to Utilities and press to select.
3
or to Radio Info and press to select.
4
or to Site Number and press to
select.
The display shows the Network ID and the Site
Number.
Checking the Site Info
Note: If you are not currently registered at a site, the
display shows Not Registered.
The Site Info feature provides information that can be
useful to a service technician. It consists of the
following information:
• Repeater number of current Control Channel
repeater.
• RSSI: Last signal strength value measured from
Control Channel repeater.
• Neighbor List sent by Control Channel repeater
(five numbers separated by commas).
Advanced Features in Connect Plus Mode
250
English
To Next Page
Loading...