Pending Firmware – Version
1
to access the menu.
2
or to Utilities and press to select.
3
or to Radio Info and press to select.
4
or to Updates and press to select.
5
or to Firmware and press to select.
6
or to Version and press to select.
If there is a pending Option Board firmware file,
the display shows the pending firmware version
number.
If there is a pending Option Board firmware file,
the display shows Firmware is Up to Date.
Pending Firmware – % Received
1
to access the menu.
2
or to Utilities and press to select.
3
or to Radio Info and press to select.
4
or to Updates and press to select.
5
or to Firmware and press to select.
6
or to %Received and press to select.
The screen displays the percentage of firmware
file packets collected so far.
Note: When at 100%, the radio needs to be power
cycled Off and then On to initiate the firmware
upgrade.
Pending Firmware – Download
If the Connect Plus radio has previously left an OTA
Option Board Firmware File Transfer with a partial
file, the unit automatically rejoins the file transfer (if
still ongoing) when an internal timer expires. If you
want the unit to rejoin an ongoing Option Board
Firmware File transfer prior to expiration of this
Advanced Features in Connect Plus Mode
254
English
To Next Page
Loading...