Receiving and Responding to a Group Call
To receive a call from a group of users, your radio
must be configured as part of that group.
When you receive a Group Call (while on the Home
screen), the LED blinks green. The first line of the
display shows the caller alias, and the RSSI icon. The
second line displays the group alias and the Group
Call icon (in Digital mode only). Your radio unmutes
and the incoming call sounds through the radio's
speaker.
1 Hold the radio vertically 1 to 2 inches (2.5 to 5.0
cm) from your mouth.
• If the Channel Free Indication feature is
enabled, you hear a short alert tone the
moment the transmitting radio releases the
PTT button, indicating the channel is free for
you to respond. Press the PTT button to
respond.
• If the Voice Interrupt feature is enabled, press
the PTT button to stop the current call from the
transmitting radio and free the channel for you
to talk/respond.
The LED lights up solid green.
2 Wait for one of the following tones to finish (if
enabled), and speak clearly into the microphone.
• The Talk Permit Tone.
• The PTT Sidetone.
3 Release the PTT button to listen.
If there is no voice activity for a predetermined period
of time, the call ends.
See Making a Group Call on page 48 for details on
making a Group Call.
Note: If the radio receives a Group Call while not on
the Home screen, it remains on its current screen
prior to answering the call.
Note: Long press the button to go to the Home
screen to view the caller alias before replying.
Receiving and Responding to a Private Call
A Private Call is a call from an individual radio to
another individual radio.
When you receive a Private Call, the LED blinks
green. The first line of the display shows the
subscriber alias or ID, and the RSSI icon. The second
Making and Receiving Calls in Non-Connect Plus Mode
44
English
To Next Page
Loading...