When the target radio responds, the LED blinks
green.
8 If the Channel Free Indication feature is enabled,
you will hear a short alert tone the moment the
target radio releases the PTT button, indicating the
channel is free for you to respond. Press the PTT
button to respond.
If there is no voice activity for a predetermined
period of time, the call ends. You hear a short
tone. The display shows Call Ended.
Making a Phone Call
1 Press the programmed Manual Dial button to
enter into the Manual Dial screen.
2
or to Phone Contact and press to
select.
The display shows Number:.
3 Use the keypad to enter a subscriber alias.
If the access code was not preconfigured in the
Contacts list, the display shows Access Code:.
Enter the access code and press the button to
proceed.
The LED lights up solid green. The Phone Call
icon appears in the top right corner. The first text
line shows the subscriber alias. The second text
line displays the call status.
If the call-setup is successful, the DTMF tone
sounds. You hear the dialing tone of the telephone
user. The first text line shows the subscriber alias.
The Phone Call icon remains in the top right
corner.
If the call-setup is unsuccessful, a tone sounds
and the display shows Phone Call Failed. Your
radio returns to the Access Code input screen. If
the access code was preconfigured in the
Contacts list, the radio returns to the screen you
were on prior to initiating the call.
4 Hold the radio vertically 1 to 2 inches (2.5 to 5.0
cm) from your mouth.
5 Press the PTT button to talk and release it to
listen.
6 To enter extra digits, if requested by the Phone
Call, do one of the following.
Making and Receiving Calls in Non-Connect Plus Mode
56
English
To Next Page
Loading...