3
or to Radio Settings and press to
select.
4
or to Talkaround and press to select.
You can also use
or to change the selected
option.
5
Press
to enable/disable the Talkaround.
The display shows beside Enabled.
The disappears from beside Enabled.
Monitoring Features
Monitoring a Channel
Use the Monitor feature to make sure a channel is
clear before transmitting.
This feature is not applicable in Capacity Plus and
Linked Capacity Plus.
1 Press and hold the programmed Monitor button
and listen for activity.
The Monitor icon appears on the display and the
LED lights up solid yellow. You hear radio activity
or total silence, depending on how your radio is
programmed. This indicates that the channel is in
use.
2 Press the PTT button to talk and release it to
listen.
Permanent Monitor
Use the Permanent Monitor feature to continuously
monitor a selected channel for activity.
Note: This feature is not applicable in Capacity Plus
and Linked Capacity Plus.
1 Press the programmed Permanent Monitor
button to activate permanent monitoring of the
channel.
Radio sounds an alert tone, the LED lights up solid
yellow, and the display shows Permanent
Monitor On. The Monitor icon appears on the
display.
2 Press the programmed Permanent Monitor
button to exit Permanent Monitor mode.
Making and Receiving Calls in Non-Connect Plus Mode
59
English
To Next Page
Loading...