Advanced Features in Non-Connect
Plus Mode
Radio Check
If enabled, this feature allows you to determine if
another radio is active in a system without disturbing
the user of that radio. No audible or visual notification
is shown on the target radio.
Sending a Radio Check
1 Access the Radio Check feature.
Radio
Control
Steps
Programmed
Radio Check
button
1 Press the programmed Radio
Check button.
2
or to the required
subscriber alias or ID and
press to select.
Menu
1
to access the menu.
Radio
Control
Steps
2
or to Contacts and
press to select.
3 Use one of the steps
described next to select the
required subscriber alias or
ID:
• Select the subscriber alias
or ID directly.
•
or to the
required subscriber
alias or ID and press
to select.
•
Use the Manual Dial
menu.
•
or to Manual
Dial and press to
select.
Advanced Features in Non-Connect Plus Mode
61
English
To Next Page
Loading...