remotely, any audible activity surrounding the target
radio.
Your radio must be programmed to allow you to use
this feature.
Initiating Remote Monitor
1 Access the Remote Monitor feature.
Radio
Control
Steps
Programm
ed Remote
Monitor
Button
1 Press the programmed Remote
Monitor button.
2
or to the required
subscriber alias or ID and press
to select.
Menu
1
to access the menu
2
or to Contacts and
press to select
3 Use one of the steps described
next to select the required
subscriber alias or ID
Radio
Control
Steps
• select the subscriber alias or
ID directly
•
or to the required
subscriber alias or ID and
press to select.
•
use the Manual Dial menu
•
or to Manual
Dial and press to
select.
•
or to Radio
Number and press to
select.
• If there was previously
dialed ID, the ID appears
along with a blinking
cursor. Else, the first line
of the display shows
Advanced Features in Non-Connect Plus Mode
63
English
To Next Page
Loading...