•
or to Yes and press to select, and
repeat Steps 5 to 7.
•
or to No and press to save the
current list.
Deleting an Entry from the Scan List
1
to access the menu.
2
or to Scan and press to select.
3
or to View/Edit List and press to
select.
4 Select the required alias or ID by performing one
of the following actions:
Radio
Control
Steps
Radio
Navigation
Buttons
or to the required alias or
ID.
Radio
Control
Steps
Keypad
Key in the first character of the
required alias.
A blinking cursor appears.
Press to move one space to the
left. Press to move one space to
the right. Press the key to
delete any unwanted characters.
Long press to change the
text entry method.
The first line of the display shows
the characters you keyed in. The
next lines of the display show the
short listed search results. The
alias search is case-insensitive. If
there are two or more aliases with
the same name, the radio displays
the alias that is listed first in the list.
Advanced Features in Non-Connect Plus Mode
67
English
To Next Page
Loading...