Note: Press button or to exit alias search.
If you release the PTT button while the radio is setting
up the call, it exits without any indication and returns
to the previous screen.
Your radio may be programmed to perform a radio
presence check prior to setting up the Private Call. If
the target radio is not available, you hear a short tone
and see Party Not Available on the display; the
radio returns to the menu prior to initiating the radio
presence check.
1
to access the menu.
2
or to Contacts and press to select.
The entries are alphabetically sorted.
3 Key in the first character of the required alias.
A blinking cursor appears.
4 Use the keypad to type the required alias.
Press to move one space to the left. Press to
move one space to the right. Press the
key
to delete any unwanted characters.
The first line of the display shows the characters
you keyed in. The second line of the display
shows an alias that matches what you have keyed
in. The alias search is case-insensitive. If there are
two or more entries with the same name, the radio
displays the entry that is listed first in the Contacts
list.
5
or to scroll to desired entry, if necessary.
6 Hold the radio vertically 1 to 2 inches (2.5 to 5.0
cm) from your mouth.
7 Press the PTT button to make the call.
The LED lights up solid green. The first line
displays the target radio’s ID. The second line
displays the call type and the Call icon.
8 Wait for the Talk Permit Tone to finish (if enabled)
and speak clearly into the microphone.
9 Release the PTT button to listen.
When the target radio responds, the LED blinks
green.
10 If the Channel Free Indication feature is enabled,
you will hear a short alert tone the moment the
Advanced Features in Non-Connect Plus Mode
78
English
To Next Page
Loading...