7
or to the required tone and press to
select. appears beside selected tone.
The display shows Contact Saved.
All Tones
1
to access the menu.
2
or to Utilities and press to select.
3
Go to Radio Settings. SelectTones/Alerts.
Select All Tones. Toggle All Tones to be
enabled or disabled.
Ring Alert Type Selection
You can program your the radio calls to one
predeternined vibrate call. If All Tones status is
disabled, the radio displays the All Tone Mute icon.
If All Tones status is enabled, the related ring alert
type is displayed.
The radio sounds one vibration if it is a momentary
ring style. The radio will vibrate repetitively if it is a
repetitive ring style. When set to Ring & Vibrate, the
radio sounds a specific ring tone if there is any
incoming radio transaction (i.e. Call Alert, Message or
Job Ticket). It sounds like a good key tone or missed
call. If the notification list is not empty, the radio
repeats a vibration every 5 minutes.
1
to access the menu.
2
or to Utilities and press to select.
3
Go to Radio Settings. Select Tones/Alerts.
Select Ring Alert Type.
4 Choose from one of the following:
•
Ring
•
Vibrate
•
Vibrate & Ring
•
Silent
Escalating Alarm Tone Volume
You can program your radio to continually alert you
when a radio call remains unanswered. This is done
by automatically increasing the alarm tone volume
over time. This feature is known as Escalert.
Advanced Features in Non-Connect Plus Mode
85
English
To Next Page
Loading...