Receiving and Making Calls
English
18
NOTE: See Making a Selective Call on page 20 for details on
making a Selective Call.
Making a Radio Call
After selecting your channel, you can select a subscriber alias
or ID, or group alias or ID by using:
• The Contacts list (see Contacts Settings on page 27)
• A programmed One Touch Access button
• The programmed number keys – This method is for Group,
Private and All Calls only and is used with the keypad
microphone (see Making a Group, Private or All Call with
the Programmable Number Key on page 69). Manual
Dial (via Contacts) – This method is for Private Calls only and
is dialed using a keypad microphone (see Making a Private
Call by Manual Dial on page 68)
NOTE:
The One Touch Access feature allows you to make a
Group or Private Call to a predefined ID easily. This
feature can be assigned to a short or long
programmable button press.You can ONLY have one
ID assigned to a One Touch Access button. Your
radio can have multiple One Touch Access buttons
programmed.
Making a Group Call
To make a call to a group of users, your radio must be
configured as part of that group.
Procedure:
1 Select the channel with the active group alias or ID. See
Selecting a Channel on page 15.
OR
Press the programmed One Touch Access button.
2 Press the PTT button to make the call. The green LED lights
up. The first text line shows the Group Call icon and the
group call alias.
3 Wait for the Talk Permit Tone to finish (if enabled) and speak
clearly into the microphone.
OR
Wait for the PTT Sidetone to finish (if enabled) and
speak clearly into the microphone.
To Next Page
Loading...
