5
English
6. If the Channel Free Indication feature is enabled, you
will hear a short alert tone the moment the target radio
releases the PTT button, indicating the channel is free
for you to respond. Press the PTT button to respond.
OR
If there is no voice activity for a predetermined period of
time, the call ends.
For All Call and Selective Call features, please refer to
MOTOTRBO XiR P3688 Non-Display Portable User Guide
(68012008033)
Making a Call Alert
1. Press the programmed One Touch Access button to
make a Call Alert to the predefined ID.
2. The LED lights up solid green when your radio is
sending the Call Alert.
3. If the Call Alert acknowledgement is received, two chirps
sound.
OR
If the Call Alert acknowledgement is not received, a low-
pitched tone sounds.
Sending an Emergency Alarm
NOTE: If your radio is set to Silent, it will not have any
audio indicators during Emergency Mode.
1. Press the programmed Emergency On button.
2. When an Emergency Alarm acknowledgment is
received, the Emergency tone sounds and the LED
blinks green.
OR
If your radio does not receive an Emergency Alarm
acknowledgement, and after all retries have been
exhausted, a low-pitch tone sounds.
3. Radio exits the Emergency Alarm mode.
Voice Announcement
Press the programmed Voice Announcement button to
toggle voice announcement on or off.
Andorra_QRC-APAC_EN.fm Page 5 Tuesday, May 28, 2013 9:41 AM
To Next Page
Loading...