English
75
4 < or > to VOX.
5 Press e to enable VOX. The display shows 9 beside
Enabled.
OR
Press
e to disable VOX. The 9 disappears from beside
Enabled.
If the Talk Permit Tone feature is enabled (see Turning the
Talk Permit Tone On or Off on page 70), use a trigger word to
initiate the call. Wait for the Talk Permit Tone to finish before
speaking clearly into the microphone.
NOTE: At Step 4, you can also use
< or > to change the
selected option.
Voice Announcement
This feature enables the radio to audibly indicate the current
Zone or Channel the user has just assigned, or programmable
button press. This audio indicator can be customized per
customer requirements. This is typically useful when the user is
in a difficult condition to read the content shown on the display.
Use the following features to toggle Voice Announcement on or
off.
Procedure:
Press the programmed Voice Announcement button.
OR
Follow the procedure below.
1 c to access the menu.
2 < or > to Utilities and press e to select.
3 < or > to Radio Settings and press e to select.
4 < or > to Voice Announcement.
5 Press e to enable Voice Announcement. The display
shows 9 beside Enabled.
OR
Press
e to disable Voice Announcement. The 9
disappears from beside Enabled.
NOTE: At Step 3, you can also use
< or > to change the
selected option.
LKP_APAC.book Page 75 Wednesday, July 18, 2012 11:01 AM
To Next Page
Loading...