Advanced Features
English
91
Lone Worker
This feature prompts an emergency to be raised if there is no
user activity, such as any radio button press or activation of the
channel selector, for a predefined time.
Following no user activity for a programmed duration, the radio
pre-warns the user via an audio indicator once the inactivity
timer expires.
If there is still no acknowledgment by the user before the
predefined reminder timer expires, the radio initiates an
Emergency Alarm.
Only one of the following Emergency Alarms is assigned to this
feature:
• Emergency Alarm
• Emergency Alarm with Call
• Emergency Alarm with Voice to Follow
The radio remains in the emergency state allowing voice
messages to proceed until action is taken. See Emergency
Operation on page 65 on ways to exit Emergency.
NOTE: This feature is limited to radios with this function
enabled. Check with your dealer or system
administrator for more information.
Password Lock Features
If enabled, this feature allows you to access your radio via
password upon powering up.
Accessing the Radio from Password
Procedure:
Power up the radio.
1 You hear a continuous tone.
2 Enter your current four-digit password with the radio’s
keypad. The display shows
●●●●. Press c to proceed.
OR
Enter your current four-digit password. Press
^ or v to edit
each digit’s numeric value. Press
> or c to move to the
next digit. Each digit changes to
●. Press c to confirm
your selection.
You hear a positive indicator tone for every digit pressed.
Press
< to remove the each ● on the display. You hear a
negative indicator tone, if you press
< when the line is
empty, or if you press more than four digits.
3 If the password is correct:
Your radio proceeds to power up. See Powering Up the
Radio on page 5.
FKP_APAC.book Page 91 Thursday, October 11, 2012 10:42 AM
To Next Page
Loading...