Advanced Features
English
61
Assigning Ring Styles
You can program your radio to sound one of ten predefined
ringing tones when receiving a Call Alert or a Text Message
from a particular contact.
Procedure:
1 c to access the menu.
2 ^ or v to Contacts and press c to select.The entries
are alphabetically sorted.
3 ^ or v to the required alias or ID and press c to select.
4 ^ or v to Edit and press c to select.
5 Press c until display shows Edit Ringtone menu.
6 A 9 indicates the current selected tone.
7 ^ or v to the required tone and press c to select. 9
appears beside selected tone.
8 The display shows a positive mini notice.
The radio sounds out each ring style as you navigate through
the list.
Escalating Alarm Tone Volume
You can program your radio to continually alert you when a
radio call remains unanswered. This is done by automatically
increasing the alarm tone volume over time. This feature is
known as Escalert.
Procedure:
1 c to access the menu.
2 ^ or v to Utilities and press c to select.
3 ^ or v to Radio Settings and press c to select.
4 ^ or v to Tones/Alerts and press c to select.
5 ^ or v to Escalert.
6 Press c to enable Escalert. The display shows 9 beside
Enabled.
OR
Press
c to disable Escalert. The 9 disappears from
beside Enabled.
NOTE: At Step 5, you can also use
< or > to change the
selected option.
FKP_APAC.book Page 61 Thursday, October 11, 2012 10:42 AM
To Next Page
Loading...