Advanced Features
English
83
4 ^ or v to the required device and press c to select.
OR
^ or v to Find Devices to locate available devices.
^ or v to the required device and press c to select.
5 ^ or v to Connect and press c to select. Display shows
Connecting to <device>.
Your Bluetooth-enabled device may require additional steps
to complete the pairing. Refer to respective Bluetooth-
enabled device’s user manual.
6 If successful, the radio display shows <Device>
Connected. A tone sounds and 9 appears beside the
connected device. The Bluetooth Connected icon appears
on the status bar.
OR
If unsuccessful, the radio display shows Connecting
Failed.
Do not turn off your Bluetooth-enabled device or press d
during the finding and connecting operation as this cancels the
operation.
NOTE: If pin code is required, use the same entry method as
Step 2 in Accessing the Radio from Password on
page 79.
Disconnecting from a Bluetooth Device
Procedure:
1 On your radio, press c to access the menu.
2 ^ or v to Bluetooth and press c to select.
3 ^ or v to Devices and press c to select.
4 ^ or v to the required device and press c to select.
5 ^ or v to Disconnect and press c to select. Display
shows Disconnecting from <device>.
Your Bluetooth-enabled device may require additional steps
to disconnect. Refer to respective Bluetooth-enabled
device’s user manual.
6 The radio display shows <Device> Disconnected. A
positive indicator tone sounds and 9 disappears beside the
connected device. The Bluetooth Connected icon
disappears on the status bar.
Switching Audio Route
You can toggle audio routing between internal radio speaker
and external Bluetooth-enabled accessory.
Procedure:
1 Press the programmed Bluetooth Audio Switch button.
To Next Page
Loading...