2 - 60 MT2070/MT2090 User Guide
4. Tab to Next > and press ENT. The At Time dialog displays.
Figure 2-72
At Time Dialog Box
5. Enter the time using the 24 hour clock format in the (hh:mm) text box.
6. Select > to move the time to the right. Repeat for additional time periods.
7. Tab to Next > and press ENT. The Encryption dialog displays.
Encryption
Figure 2-73
Encryption Dialog Boxes
Based on the encryption method and the authentication type, the user may have to manually enter pre-shared
encryption keys (or a passkey phrase). When the user selects any authentication type other than None, 802.1x
authentication is used and the keys are automatically generated.
NOTE The only available encryption methods in Ad-hoc are Open, WEP40 and WEP104. Use the Encryption
dialog to select an encryption method. This page contains the fields to configure the encryption method
and corresponding keys, if any. The drop-down list includes encryption methods available for the selected
security mode and authentication type.
To Next Page
Loading...
