5 - 10 MT2070/MT2090 User Guide
Adaptive Scanning (continued)
Interference Suppression Mode
Parameter # F8h 04h B3h
•
Disable Interference Suppression: Reduced working range is possible in the presence of interfering
ambient light.
•
Interference Suppression Always On: Recommended only if the scanner is always in the presence of
interfering ambient light.
•
Ambient Light Interference Suppression
Auto Detection: The scan angle changes from wide angle to medium angle in the
presence of interfering ambient light, only when Interference
Suppression Scan Angle is set to Medium (see page 5-8).
Disable Interference Suppression
(00h)
Interference Suppression Always On
(01h)
*Ambient Light Interference Suppression
Auto Detection
(02h)
To Next Page
Loading...
