2 - 36 MT2070/MT2090 User Guide
Scan Transmit
When Scan Transmit is selected on the Main Menu, the Scan & Send screen displays. On this screen the user can
manually enter a quantity and scan data to a computer using a tethered cable or a Bluetooth connection via the
STB2078 cradle.
Figure 2-39
Scan & Send Screen
•
: Use the keypad to enter a quantity into this field. Scanning is disabled when this field is highlighted.
•
: Scan a bar code to enter data into this field. After scanning data, the quantity and data are sent to
MCL Link.
NOTE On the first transmit; the application establishes communication with MCL link which may take several
seconds.
To Next Page
Loading...
