129
Setting the Text Size
1. From the main menu, select Setup > Display > Text Size.
2. Press Change. Select Standard or Zoom to see the text
on the display in two sizes.
Setting the Screen Saver
1. From the main menu, select Setup
>Display
> Screen Saver.
2. Press Change. Press Change again
and select the screen saver setting:
Automatic or Disabled.
3. Scroll to Text. Press Change. Type/
edit the screen saver text using the keypad. (For details on
text editor use, see “Writing Text” on page 167.).
4. Press Select
to exit.
Setting the Backlight
Your MTM800E has 3 backlight settings:
Manual - By pressing the Backlight Key you can toggle
through 5 intensity profiles. See the table below.
Semi-Auto - Per default the backlights are switched off. You
can switch the backlights on by pressing the Dimmer button
. After a few seconds (configured by your Service
Provider) the backlights switch off automatically.
The menu options will display the Screen Saver if your Service
Provider pre-programmed this feature.
Setting the backlight intensity level by pressing the Dimmer
button
will also change the LED, keypad backlight, and
Emergency button backlight intensity.
Screen Saver:
Delete
Ok
Hello
To Next Page
Loading...
