3-40 Customer Programming Software (CPS)
6866588D21-D Chapter 3 - MTP850 Ex/MTP810 Ex Product Information Manual March 2009
13 Subscriber Unit Parameters
Selecting this menu option will display its information in the right side of the screen. Not all fields are
editable, some being information fields only.
The first 6 fields provide information about the terminal’s codeplug, software and application image
versions, its model type, number and hardware ID.
Field 7 is a copyright notice.
Equipment Temporary Disabled, Subscription Temporary Disabled. When a terminal has been
disabled over the air (stunned), this field will be ‘checked’. It can be unchecked over the air or via the
CPS. If the terminal is stunned it will no longer be usable on the system (TMO) or off the system
(DMO).
Equipment Permanently Disabled, Subscription Permanently Disabled. The feature allows to
disable only the Terminal’s Equipment Identity (TEI). The equipment will not function. The disable
operation may be performed during codeplug programming or by SwMi transmitting the disable
command via air interface. User or TETRA protocol intervention cannot reverse the disable state.
Serial Number show the terminal’s serial number
Radio TEI show the terminal’s Terminal Equipment Identity (TEI)
Radio ISSI.This is where the terminal’s own Individual Short Subscriber Identity (ISSI) is entered. It
is the terminal’s unique system ID and it acts like a normal telephone number. The ISSI can contain
numbers in the range 1 - 13999999. Without a valid ISSI the terminal will not log on to a system.
Organisation. The name of the organisation where the terminal was programmed can be entered
here for reference.
Person. The name of the person programming the terminal can be entered in this field.
To Next Page
Loading...
