3-58 Customer Programming Software (CPS)
6866588D21-D Chapter 3 - MTP850 Ex/MTP810 Ex Product Information Manual March 2009
17 Man Down
17.1 Man Down Radio Enable
To activate the Man Down feature, check the box. To deactivate, uncheck the box.
17.2 Angle Feature Enable
If enabled, the radio will be monitored for the duration it is horizontal or below the Activation Angle to
decide if it will enter into Man-Down mode.
The radio will enter into the Man-Down mode if it is still horizontal or below the Activation Angle after
some pre-programmed timers expire, an indication that the radio user has fallen down.
Turn the check box on (Enable) or off (Disable) by clicking in the check box.
Note:
• The timers are restarted anytime when the radio is moved above the Activation Angle before
Man-Down mode is entered or when the PTT button is pressed.
• The Angle Feature functionality may be used together with the No-Movement Feature
functionality but not the Movement Alarm functionality. Both the No-Movement Feature and
Angle Feature functionalities may be possibly active at the same time and trigger independent
pre-alert tone.
17.3 No-movement Feature Enable
If enabled, the radio will be monitored for the duration it is still to decide if it will enter into Man-Down
mode.
The radio will enter into the Man-Down mode when the vibration that the radio perceives is below
the sensitivity which has been selected after some pre-programmed timers expire, an indication that
the radio user does not move any more.
Turn the check box on (Enable) or off (Disable) by clicking in the check box.
Note:
To Next Page
Loading...
