3-60 Customer Programming Software (CPS)
6866588D21-D Chapter 3 - MTP850 Ex/MTP810 Ex Product Information Manual March 2009
If disabled, the pre-alert tone will be played only once.
Turn the check box on (Enable) or off (Disable) by clicking in the check box.
17.11 Pre-alert Repeat Period
This parameter defines the time period after which the pre-alert tone is repeated when the Pre-alert
Repeat Enable is enabled.
Type the required value in the field.
17.12 Feature Suspend Tone Enable
If enabled, every time the Man Down feature is enabled or disabled using the programmable side
buttons, a tone is sounded.
Turn the check box on (Enable) or off (Disable) by clicking in the check box.
17.13 Feature Suspend Tone Gap
This parameter defines the time period between tone repetitions when the Feature Suspend Tone
Enable is enabled.
Type the required value in the field.
18 TMO Voice Services
This menu has the following 5 sub menus
• Pre-emptive Private Call
• Emergency Options
• Scanning Parameters
• Voices Services Options
To Next Page
Loading...
