Motorola MTP850 Ex - 22.3.8 Ring Tones Volumes; 22.3.9 Key Clicks Tones Volume; 22.3.10 DTMF Tones Volume; 22.3.11 Tones

Audio Settings 3-93
March 2009 Chapter 3 - MTP850 Ex/MTP810 Ex Product Information Manual 6866588D21-D
The value displayed by a field is a relative number showing how loud that particular parameter is set
to.
The bigger the number, the greater is the value of that parameter.
To set the required audio level, first select the Field Value box to display the down arrow, selecting
the down arrow will display the available options.
22.3.8 Ring Tones Volumes
The ring tone is the sound made when a call arrives. This page allows changing the codeplug values
of the maximum ring tone volumes for the various speakers listed in the window.
The value displayed by a field is a relative number showing how loud that particular parameter is set
to.
The bigger the number, the greater is the value of that parameter.
To choose the level, put the pointer into the field value, click on the arrow, and drag the pointer to
the desired level.
22.3.9 Key Clicks Tones Volume
The key clicks tone is the sound made when a key is pressed. This page allows changing the
codeplug values of the maximum key clicks tone volumes for the various speakers listed in the
window.
The value displayed by a field is a relative number showing how loud that particular parameter is set
to.
The bigger the number, the greater is the value of that parameter.
To choose the level, put the pointer into the field value, click on the arrow, and drag the pointer to
the desired level.
22.3.10 DTMF Tones Volume
The DTMF tone is the sound made when a DTMF is sent. This page allows changing the codeplug
values of the maximum DTMF tone volumes for the various speakers listed in the window.
The value displayed by a field is a relative number showing how loud that particular parameter is set
to.
The bigger the number, the greater is the value of that parameter.
To choose the level, put the pointer into the field value, click on the arrow, and drag the pointer to
the desired level.
22.3.11 Tones
22.3.11.1 Clear to Send Tone
Specifies if the called person will hear a short beep during a Group Call or a Private Call when the
caller ends the transmission by releasing the PTT.
Turn the check box on (Enable) or off (Disable) by clicking in the check box.
22.3.11.2 Talk Permit Tone Option
Defines the duration of the Talk Permit Tone when the user presses the PTT button.
There are 3 settings: