3-114 Customer Programming Software (CPS)
6866588D21-D Chapter 3 - MTP850 Ex/MTP810 Ex Product Information Manual March 2009
26.1.2 Outgoing Mail List
This list may contain up to 100 entries made up of the following options:
26.1.2.1 Template Type
This field offers the choice between User Defined and PreDefined template types. The PreDefined
template is a message sent using the protocol identifier as set in the Codeplug -> MS Short Data
Access (SDA)-> MS-SDA Protocol Identifier. This type of messages is intended for database
applications connected to the Peripheral Equipment Interface (PEI) of the receiving phone, or for a
short data router on the infrastructure, as it is not possible to send pre-defined messages from
phone display to phone display.
The User Defined template is a text message enabling the user to save the time by using a pre-
typed or saved message. To choose the message type, place the pointer inside the field, click on
the arrow, and drag the pointer to the desired selection, the options are:
• User Defined
• Pre Defined
26.1.2.2 Prompt ID
This is a reference number, allowing multiple messages to be sent to the same address. The remote
application works out what to do with each message as it is received (in other words routes it to
some other destination). The field is enabled only if PreDefined is selected in the Type field.
26.1.2.3 Prompt Text
This field contains non-editable prompt text of up to 12 characters that will appear on the phone
screen, for example “Arrived At”, the user is then able to add further text to the message. The field is
enabled when PreDefined is the selected option in the Type field.
26.1.2.4 Address
This field is only enabled by selecting the ‘PreDefined’ option in the Type field and it contains the
address to which the message will be sent, usually to an ISSI.
26.1.2.5 Code Scheme
There are two available options:
ASCII coding (LATIN1_8_BITS) scheme which is used by most western european languages.
To Next Page
Loading...
