43
Group Scrolling Configuration
Your Service Provider can configure scrolling via rotary knob
or navigation key as follows:
• Scroll to next folder – when the folder end is reached
during group scrolling, further scrolling switches to the
group list in the next folder.
For example: Folder 1 has Group11 and Group12. Folder 2
has Group21 and Group22. Group11, Group12, Group21,
Group22 will appear during scrolling.
OR
• Stay in folder – when the folder end is reached during
group scrolling, further scrolling restarts the folder group
list. To move to the next Folder, you should select it.
For example: Folder 1 has Group11 and Group12. Folder 2
has Group21 and Group22. Select Folder 1: Group11,
Group12, Group11,Group12 will appear during scrolling.
Change to Folder 2: Group 21, Group 22, Group 21, and
Group 22 will appear during scrolling.
In addition, your Service Provider might configure the rotary
knob as follows:
• End-Stop Rotary Knob Scrolling – the rotary knob will
stop when it reaches the last group in the folder, and a
tone will alert you that you have reached the last group in
the folder. Use the navigation key to continue scrolling
through the list.
Activating/Deactivating Scanning
See “Setting Group Scanning” on page 126.
Making a Group Call
1.
From the Home display and if this is the re-
quired group, press and hold the PTT.
2.
Wait for the talk permit tone (if configured)
and then speak into the microphone.
Release the PTT button to listen.
Network 1
Optns Contcs
Folder 1
Police
Hello
To Next Page
Loading...
