53
2.
Scroll to Config, and press Select.
Selecting DMO Group Call MS to MS
To change from gateway or repeater mode to MS - MS mode
(DMO terminal to terminal call):
1.
Press Optns, scroll to Config and press
Select.
2.
Scroll to MS - MS and press Select. The fol-
lowing message will be displayed for a few
seconds: MS - MS Will Be Used.
Selecting DMO Group Call via Gateway
While in DMO, proceed as follows to choose a gateway to set
up a call via Gateway for the selected talkgroup:
1.
Press Optns, scroll to Config and press Select.
2.
Scroll to Gateway and press Select.
3.
The display shows the last gateway selection method. Use
the navigation key to scroll to your selection and press Ok:
Automatic
– the MTP850 Ex/MTP810 Ex
will use the first available gateway for that
talkgroup. The Gateway icon will flash upon
selecting that option.
Folder
TG by Folder
Config
1 Automatic
2 Specific
1 MS - MS
2 Gateway
3 Repeater
4 GW + Rep
1 Automatic
2 Specific
DMO Options sub-menu
Trunked Mode
TG by abc
DMO Options
TG by Folder
TG by abc
Folder
Trunked Mode
Config
Select Back
Config
Gateway
Repeater
MS - MS
GW + Rep
Select Back
GW Options:
Specific
Automatic
Select Back
To Next Page
Loading...
