Motorola MTP850 Ex - Page 67

59
DMO Group Call
When an InterMNI call is received, you can press Network to
see the Network alias and/or number.
Receiving a Group Call (via Gateway / Repeater)
The display shows the ID of the TMO caller.
The Gateway plus DMO or the Repeater icons are displayed
accordingly to the ongoing call type (Gateway or Repeater).
• If MS to MS mode is selected, and the terminal receives a call
via repeater, the repeater icon will be shown (if the repeater
mode is enabled by the Service Provider, otherwise the call
will not be accepted).
• If Gateway mode is selected but a gateway is not available,
The Gateway icon will be solid in case of an incoming
gateway call.
InterMNI Call
Open Group Call
OR
Group In Use
ID: David
Optns Folder
Group In Use
ID:...1234
TG4
Optns Network
Open Group
Private ID
Private ID
OR
without alias
with alias
Without alias and
OR
Private ID
Group In Use
Folder 1
Optns Folder
Group In Use
ID:124
TG4
Optns Folder
Group In Use
ID: David
TG4
Optns Folder
TG4
(e.g. via gateway)
(e.g. via gateway)
(e.g. via repeater)