Logging On
Procedure:
1 From the home screen, press the MENU key.
2 Select More . . . → RUI → Log on.
3 Highlight:
• User ID and press Select to enter User ID List. If you are a new user on this radio, select [New User ID] and
enter your user ID. Otherwise select your user ID from the list.
• Second line and press Edit, to enter user ID and press Ok.
4 Select User PIN, enter your credentials, and press Ok.
5 Logging screen is displayed.
Logging Off
Procedure:
1 From the home screen, press the MENU key.
2 Select More . . . → RUI → Log off.
3 Press Accept.
Networks
This menu item allows you to switch between the radio operation modes.
Selecting Network Operation Mode
Procedure:
1 From the home screen, press the MENU key.
2 Select More . . . → Networks.
3 Select one of the following:
• Networks Sel — Selects the network to which the radio is allowed to register.
• Trunked Mode — Switches to the mode using infrastructure.
• Direct Mode — Switches to the mode without using infrastructure.
• Repeater Mode — Switches to the Repeater Mode.
• TXI Mode — Select Activate to stop sending any radio transmission.
Note: If the radio is in TXI Mode, it is not possible to switch from Direct Mode to Trunked Mode
or Repeater Mode.
Selecting Your Network
Procedure:
1 From the home screen, press the MENU key.
2 Select More . . . → Networks → Networks Sel → Home Only.
3 Your radio registers to the home network. If several home networks are defined, the radio registers to the first
available network on the list.
98 | Main Menu
Send Feedback | |
To Next Page
Loading...
