2 Turn clockwise until snug.
Installing the Battery
Procedure:
1 Remove the battery from its protective case.
2 Insert the battery top into the compartment as illustrated.
3 Carefully press the battery bottom downward until it clicks into place.
Note:
• Your service provider can configure the radio to turn on automatically after you insert the battery.
• Your radio always powers up, if you remove the battery for a period shorter than 3-5 seconds.
Removing the Battery
Prerequisites: Turn off the radio.
Procedure:
1 Push the latch.
2 Lift the battery out.
18 | Getting Started
Send Feedback | |
To Next Page
Loading...
