Icon Description
Remote Control
Indicates that the radio is being remotely controlled and some commands are being exe-
cuted in the background. For example, when the radio is controlled via special SDS mes-
sages or triggered to send a GPS location report.
The icon is not visible in the Extra Zoom Mode.
Powering On the Radio
Procedure:
1 Press and hold ON button.
2 Your radio performs a self-check and registration routine.
3 After successful registration, your radio is in service.
Note: Your radio powers on without visible and audible notification if Covert Mode is activated.
Unlocking Your Radio
Your radio may be locked at power up. To unlock it after powering on, enter the code at the prompt. Your radio enters
the default home display.
Note: The unlock code is originally set to 0000. Your service provider may change this number before you
receive your radio.
Unblocking Your Radio
Prerequisites: You blocked your radio by entering incorrect PIN code for three times (by default).
Procedure:
1 Radio displays Unit BlockedEnter PUK.
2 Enter 8–digit PUK (Personal Unblocking Key) number.
Note: The PUK is an eight-digit master code provided by your service provider.
3 Enter the new PIN code twice.
Locking/Unlocking the Keys/Buttons
Press MENU key and * key.
Note: The EMERGENCY button is not locked. Entering Emergency Mode unlocks all keys.
Getting Started | 29
| | Send Feedback
To Next Page
Loading...
