Entering TMO Mode
Procedure:
1 From the home screen, press Optns.
2 Select Trunked Mode.
Selecting Talkgroups
From the home screen, use one of the following methods:
• Press left or right NAVIGATION key. Press Select to confirm.
• Select Optns → TG by abc. Enter a talkgroup name and select the talkgroup name from the list.
• Select Optns → TG by Folder. Select a folder and then a talkgroup name.
• Press ROTARY KNOB and rotate it until the required talkgroup name is displayed. Press Select to confirm.
Note: If the ROTARY KNOB mode is set to Scroll, then you do not need to press it to enter the scrolling
mode.
Note: Your radio can have an access up to three levels of the folder structure.
Making Group Calls in TMO
The Group Call is received by all members of the selected group who have their units turned on and are in range.
Procedure:
1 Press and hold the PTT button.
2 Wait for the Talk Permit tone (if configured) and then speak into the microphone. Release the PTT button to
listen.
Note: To cancel making a group call, do one the following actions before the talk permit is granted
(depending on your service provider’s settings):
• Release the PTT button.
• Press the END key (default).
When the call is canceled, your radio displays Call Cancelled message (if configured by your service
provider).
Receiving Group Calls in Idle
Procedure:
1 The radio receives a Group Call.
Note: The incoming Group Call is signalled by a Receiving Group Call tone.
2 To respond, press and hold the PTT button.
Receiving Group Calls during Ongoing Group Calls
While in active Group Call, your radio receives a Group Call with a higher priority.
One of the following occurs:
• Your radio is forced to end the current group call and automatically join the incoming one.
• Your radio displays incoming group call screen with options:
42 | Modes
Send Feedback | |
To Next Page
Loading...
