3 If your radio displays Do you want to exit?, press Yes to exit.
Your radio exits Emergency Operations.
Repeater Mode
The Repeater Mode provides repeater connectivity between radios operating in the DMO Mode.
Figure 3: Repeater Mode Operation
A DMO repeater is used to extend the DMO range by retransmitting received information from one radio to another.
It retransmits group calls, private calls and data on a given frequency.
The repeater sends presence signal periodically on a free channel to allow other radios to synchronize on a given
frequency.
Only the radios on the same talkgroup can communicate with each other through the repeater.
Note: This is a selling feature.
Entering the Repeater Mode
To enter Repeater Mode, use one of the following ways:
• From the home screen, select Optns → Repeater Mode.
• From the home screen, press MENU key. Select More . . . → Networks → Repeater Mode.
Setting Monitor Option
Procedure:
1 From the home screen, press Optns.
2 Press Monitor.
3 Select one of the following:
• Off — Your radio works as a repeater only, no operation is available.
• Receive Only — Allows you to listen.
• Receive&Transmit — Allows you to listen and transmit by pressing PTT.
Modes | 55
| | Send Feedback
To Next Page
Loading...
