Unblocking Your Radio
Prerequisites: You blocked your radio by entering incorrect PIN code for three times (by default).
Procedure:
1 Radio displays Unit BlockedEnter PUK.
2 Enter 8–digit PUK (Personal Unblocking Key) number.
Note: The PUK is an eight-digit master code provided by your service provider.
3 Enter the new PIN code twice.
Changing PIN Codes
Procedure:
1 From the home screen, press the MENU key.
2 Select Security → Change Code.
3 Radio prompts for the Old Code. Enter currently used 4-digit security code (default setting is 0000).
4 If the entered code matches the old code, radio prompts for the new code twice.
Your radio displays Code Accepted.
Keylock Setup
The keypad lock feature allows locking the keypad to prevent pressing a key accidentally. The keypad lock/unlock
can be invoked by using an appropriate option from the radio menu or by using a predefined menu shortcut. By
default press MENU, and then * key.
Your service provider can determine which of the following elements are additionally inoperative while the keypad is
locked:
• The PTT button
• Side buttons
• The ROTARY KNOB
• The ON/OFF/END/HOME key
The EMERGENCY button is always operative.
Keypad Lock Notification
When the keypad is locked, your service provider can configure one of the following instructions:
• None — no notification is displayed.
• Notification Only — Keys Locked is displayed.
• Notification and Instruction — Press Menu * to lock/unlock keypad is displayed.
Setting Automatic Keylock Delay
Procedure:
1 From the home screen, press the MENU key.
2 Select Security → Keylock Setup → Delay.
3 Use up and down NAVIGATION keys to change the minutes and press Done.
Main Menu | 73
| | Send Feedback
To Next Page
Loading...
